1.   Connect the router to the internet.

Launch a web browser, and enter http://tplinkwifi.netor http://192.168.0.1in the address bar. Create a login password and then click Let’s Get Started.

Note: If the login window does not appear, please refer toQ1 of Need Help? in this guide.

http://tplinkwifi.net, Password, Confirm Password, Let’s Get Started

Follow the step-by-step instructions to set up the internet connection and register the TP-Link Cloud service.

What should I do if I cannot access the web management page?

• If the computer is set to a static IP address, change its settings to obtain an IP address automatically.

• Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter

http://192.168.0.1 or http://192.168.1.1 in the web

• browser and press Enter. Use another web browser and try again.
• Reboot your router and try again.
• Disable and enable the network adapter being used

What should I do if I cannot access the internet?

• Check if the internet is working normally by connecting a computer directly to the modem using an Ethernet cable. If it is not, contact your internet service provider.
• Log in to the web management page of the router, and go to theBasic > Network Map page to check whether the internet IP address is valid or not. If it is, please run the Quick Setup again; otherwise, check the hardware connection
• Reboot your router and try again
• For cable modem users, log in to the web management page of the router. Go toAdvanced > Network > Internet > MAC Clone, click Use Current Computer MAC Address and click Save. Then reboot both the modem and the router

How do I restore the router to its factory default settings?

With the router powered on, use a pin to press and hold theReset button on the back until the Power LED blinks

Log in to the web management page of the router, go toAdvanced > System Tools > Backup

Restore, and click Factory Restore. The router will restore and reboot automatically.

What should I do if I forget my web management page password?

If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it

Alternatively, press and hold the Reset button on the back of the router until the Power LED blinks to reset it, then visit http://tplinkwifi.netto create a new login password.

What should I do if I forget my wireless network password?

• If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
• Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at http://tplinkwifi.net, and go to Basic > Wireless to retrieve or reset your wireless password.

SOURCE: www.tplink.net